Fujigokoro

Named by Nakai-san after the place where the RWB HQ is located.

The owner purchased the donor car in Tokyo and shipped it to RWB HQ for the build.
Then imported it into Canada.

This car is Canada #18, #2 in Calgary.

Canada’s 1st Smooth Fender Build and North America’s 2nd.

First Japanese RWB Build for export into Canada.

Exterior Modifications:

• RWB Superwide Kit, Smooth Fender conversion, custom front and rear bumper lower center grills by Nakai.
• LED projector headlights by 9ELEVEN Headlights.
• Paint is Lamborghini Grigio Falco, done at RWB HQ by Nojima-san.
• PPF on hood, front bumper, front quarters, mirrors, rockers, partial rear fender flares, partial roof.
• Full ceramic coat protection.

Wheels & Tires:

• Work Wheels – Meister M1 3-Piece Wheels Front 18x10.5” (H-Disk ET -4) Rear 18x13” (A-Disk ET -46) – Bronze Polished Lips, Bronze Brushed Face, Gold Bolts
• Custom-made center caps with RWB logo, Cerakoted in bronze to match wheels
• Michelin PS2 Tires – 265/35/18, 315/30/18

Chassis/Suspension Modifications:

• Custom KW V3 Front and Rear Coil-Overs with HLS4 (4-wheel hydraulic lift system). Custom Springs to accommodate hydraulic lift system. KW Germany custom built the HLS4 kit specifically for this car and provided multiple spring sizes and spring rates to achieve the right ride height and ride quality.
• Rennline Front and Rear Strut Mounts
• Rennline HD RS Rear Spring Plates
• Rennline Rear Drop Links
• Rennline Front Ball Joints
• HD Complete Trailing Arm Bushings
• Tarrett Rear Sway Bar

Brakes:

• Brembo Gran Turismo Big Brake Conversion. Calipers custom painted Lamborghini Orange by Brembo.

Powertrain Modifications:

• New upgraded cams for future 3.8L N/A conversion.
• Rennline valve covers
• RS Fan Delete
• RWB Custom Valved Exhaust, made and installed at RWB HQ.

Drivetrain Modifications:

• 993 6 Speed manual transmission conversion.
• G50/20 LSD
• All new drivetrain parts with conversion.
• RS mid-weight flywheel, RS ring gear, RS pressure plate, RS clutch disc, RS guide tube, pilot bearing, release bearing, pressure plate bolts, flywheel bolts, rear main seal, slave cylinder.

Interior:

• Rennline door sills, custom finished in bronze Cerakote
• Rennline door handles, knobs, door lock pins, ignition bezel, pedals, custom finished in bronze Cerakote
• Rennline floorboards
• Rennline pedal set, custom finished in bronze Cerakote
• Custom 6-spd shifter knob and Alcantara boot
• Custom RWB build plate signed by Nakai